• <bdo id="m6t33"></bdo>
    <track id="m6t33"><div id="m6t33"></div></track>
    工程机械弹簧

    13311927901

    新闻banner
    Your current location: HOME >> News >> Technical Information

    Correct use of spring

    2020-12-02 14:27:11
    time

    For Shanghai spring manufacturers, please avoid the following improper use methods

    ⑴Exceed the use of a large amount of compression

    (300,000 times condition, the connecting parts are tightly used for a long time) The pressure is generated and the damage is caused. The use close to the tightly length will make the spring wire gradually close like this, because the spring fixed number becomes higher and the load curve becomes higher. , The spring will break due to high stress due to the proximity, please do not use more than 300,000 times.

     ⑵Use without preload

     The spring is twisted due to the up and down vibration of the spring due to the gap. If there is preload, the spring is relatively stable.

    ⑶The valve spring is used horizontally

    When the spring is used horizontally, it will cause the guide pin and the spring to wear and break.

    ⑷The use of no spring guide

    If it is used without spring guide, it is easy to cause the spring bottom and body to twist. The high local pressure of the twisted part is the main cause of the spring break. Please be sure to use the inner diameter guide pin or outer diameter guide device. .

    ⑸ When the flatness of the assembly surface is poor

    Poor parallelism of the assembly surface will cause the spring to twist, local high-pressure fracture, and the occasion of poor parallelism will cause the spring to twist and more than 300,000 times of use will cause the spring to break. Please improve the parallelism of the assembly surface under the condition of no more than 300,000 cycles.

    ⑹About spring inner diameter and guide pin

    If the gap between the guide pin and the guide pin is too small, it will cause collision and wear of the inner diameter, and the wear part is the main cause of the spring fracture; on the contrary, if the gap is too large, the spring will twist and break, and the inner diameter of the spring will be about -1.0mm. And springs with longer free lengths (free length/outer diameter greater than 4), please use step or guide pins to avoid collisions with the guide pins when the spring body is twisted.

    ⑺ Spring outer diameter and counterbore

    If the countersunk hole and the spring gap head are too small, the outer side will expand due to the compression of the spring and the countersunk hole friction will cause concentrated fracture. The preferred countersunk hole diameter is the spring outer diameter + 1.5mm. Please use the counterbore shape for the freely long spring.

     ⑻When the length of the guide pin and the depth of the counterbore are short

    If the guide pin is too short, it will cause the head of the guide pin and the spring to wear and break. The ideal length of the guide pin is set to more than 1/2 of the length of the spring, and please chamfer C3.

     ⑼Change the party or use

     When the spring is used, the spring is twisted by the force, which causes the inner ring spring to be inserted into the outer ring (or the outer ring is inserted into the inner ring) to cause fracture.

    ⑽Use of spring series

    When used in tandem, the spring will bend and exceed the length of the guide pin or counterbore, which will cause a fracture of the same reason, and the weaker load will suffer a greater compression surface fracture due to the slight difference in the load of the spring itself.

    ⑾When using fragments and foreign objects

    The part with foreign matter will cause the effective coil part to be ineffective and only the other parts will be compressed. The actual effective number of coils becomes smaller, causing high stress and fracture near the surface. Do not include foreign matter in the spring.


    label

    Recent View:

    Related news

    Copyright ? Shanghai Simtech Company All rights reserved Service support: 祥云平台
    国产a级理论片无码老男人_精品国精品国产自在久国产应用_国产精品一区二区久久不卡_国产精品国产一区二区三区
  • <bdo id="m6t33"></bdo>
    <track id="m6t33"><div id="m6t33"></div></track>